The embedded network specialist

CAN-CR200, Modular CAN Repeater

Modular ISO 11898-2 CAN Repeater with backbone bus

The CAN-CR200 is used for the galvanic isolation of two segments of a CAN bus network. The hub-functionality allows the possibility for creating star or tree topologies.
Ixxat CAN-CR200
Ixxat CAN-CR200
Ixxat CAN-CR200

One special feature of the Repeater is the automatic recognition and separation of a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.
The galvanic isolation isolates the CAN bus segments from each other as well as from the power supply.

Features and benefits

  • DIN-Rail backbone to support multi repeater-hub
  • Increased system reliability
  • Almost no influence on real-time behavior
  • Cost savings due to simple wiring


Several CAN-CR200 (and/or CAN-CR210/FO's) can be connected to a CAN bus hub via the integrated backbone bus.

CAN-CR200 Hub bus structure
CAN-CR200 Hub bus structure
Technical data
Display Transmit and defective segment (three duo LEDs), Power (one LED)
CAN bus interface ISO 11898-2 with CAN choke. Two Sub-D9 connectors and one backbone bus. CAN termination resistors are integrated (switchable).
Baudrate Up to 888 kbps
Delay 200 ns (corresponds ~40 m (~120ft.) bus length)
Power supply 9-32 V DC, 1.5 W typ., through terminals
Galvanic isolation 1 kV, 1 sec.; CAN 1, CAN 2 and backbone bus are galvanic isolated against each other.
Temperature range -20 ºC ... +70 ºC
Housing, size Plastic enclosure, 22.5 x 100 x 115 mm
Contents of delivery
- CAN-CR200
- Quick Reference Manual

Part number(s)

CAN-CR200, 2x CAN, 1x CAN backbone, all with Galvanic Isolation
CAN-CR200, 2x CAN, 1x CAN backbone, all with Galvanic Isolation
T-Bus-Connector for CAN backbone
T-Bus-Connector for CAN backbone

Getting interested?

Are you interested in the CAN-CR200, Modular CAN Repeater? Please request, without any obligation, for a quote. Would you like more information? Please send an email to or visit our contact page.
You can call us if you like, we can be reached at +31-40-2301.922. We are pleased to help you and do offer you practical advice and support.

Related products

  • CAN-CR220

    ISO 11898-2 CAN Repeater with 4 kV galvanic isolation

  • CAN-CR100

    CAN / CAN FD repeater with screw terminals

  • CAN-CR120/HV

    CAN / CAN FD repeater with screw terminals and 3 kV galvanic isolation

  • CAN-CR300

    CAN / CAN FD repeater with screw terminals and 4 channels

PC CAN-interfaces
CAN Bridges & Gateways
Communicator CAN
CANopen X-gateway
CANopen PLC-extentions
CANopen I/O Modules
canAnalyser 3 Suite
CAN Diagnostic Tools
CANopen Software
CAN Accessories