The embedded network specialist
+31-40-2301.922

Ixxat Safe T100

Modular solution for control of safe I/O signals

The Ixxat Safe T100 offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level PLe / Category 4 in IEC 13849-1.
Ixxat Safe T100
Ixxat Safe T100
Ixxat Safe T100

The Ixxat Safe T100/PS implements the PROFIsafe layer and the safe control of three dual-channel inputs, as well as one dual-channel output. The module's very compact size and flexible safety I/O routing make it perfect for integration into customer specific device solutions.

The Ixxat Safe T100 is currently available for PROFIsafe. Support for additional safety protocols (CIP Safety and FSoE) is in progress.

Features and Benefits

  • All necessary functions and methods to achieve SIL-3/PLe on one board — simplifies customer board design
  • IOs configurable for single and dual channel use
  • Pre-certified concept and hardware for easy re-certification of the final device
  • Provision of full documentation set including TÜV type approval
  • Direct connectivity to Anybus CompactCom module for non-safe fieldbus communication - safe and non-safe communication on the same wire
  • Significant reduction in time-to-market at  a significantly lower project investment

Black Channel principle

The Ixxat Safe T100 is used in customer devices together with a communication module of the Anybus CompactCom series, which is used to implement the unsafe bus connection. Safety communications use the black channel principle through the Anybus CompactCom communication module. For PROFIsafe, for example, the communication module carries out the tasks of a PROFINET I/O device.

Ixxat Safe T100 Black Channel
Ixxat Safe T100 Black Channel

Simple certification

A comprehensive safety manual is provided for device certification. This describes all the needed integration and verification steps to achieve the TÜV certification which greatly reduces the time-to-market. Especially the clear separation of safety-relevant functions from the unsafe functions of the end device by the precertified Ixxat Safe T100 plug board is a great help in this situation.

Development kit

To evaluate the Ixxat Safe T100, a corresponding development kit is available as a reference implementation. It consists of a base board with a PROFINET I/O Anybus CompactCom communication module and a host CPU, along with an Ixxat Safe T100/PS with Safety I/O leads brought out. The configuration of the Safety I/Os uses PROFINET/PROFIsafe and is supported by a special configuration tool, which can be integrated seamlessly into the Siemens Step7 toolchain, for example.

Sample application

Ixxat Safe T100 Application example
Ixxat Safe T100 Application example
Technical data
Supported standards PROFIsafe (Standard V2.4)
CIP Safety (Volume 5, V2.14)
Versions for FSoE and openSAFETY are planned
Digital inputs 3x dual channel, configurable with filter and monitor functions
Digital outputs 1x dual channel, configurable
Safety Conformance Level SIL 3, PL e category 4
Power supply 24 V (SELV / PELV), 3.3 V
Temperature range -40 °C tot +85 °C
Dimensions 70 x 40 x 15 mm
Contents of delivery
- Ixxat Safe T100
- Pre-certificering
- User Manual
- Certifieringsinstructie

Part number(s)

1.01.0300.00001
Ixxat Safe T100/PS - PROFIsafe
Ixxat Safe T100/PS - PROFIsafe
1.01.0301.00001
Ixxat Safe T100/CS - CIP Safety
Ixxat Safe T100/CS - CIP Safety
022830-B
T100 Ontwikkelings Kit voor Ixxat Safe T100/PS
 

Getting interested?

Are you interested in the Ixxat Safe T100? Please request, without any obligation, for a quote. Would you like more information? Please send an email to or visit our contact page.
You can call us if you like, we can be reached at +31-40-2301.922. We are pleased to help you and do offer you practical advice and support.