Anybus Embedded
A complete family of communication interfaces for embedded industrial applications. Integrate Anybus Embedded into a design and get instant access to all major industrial Ethernet networks and field buses.
- Supports all well known Industrial Ethernet protocols
- Access to all these protocols with one development
- No more protocol stacks or know-how needed
- Short time-to-market
- 100% compatible with any PLC or Master Controller
- Pre-certified and thus complies with all protocol specifications
- Universal control from the host microcontroller
- Includes all tools, driver and free support
Anybus CompactCom M40
All-inclusive and plug-in embedded slave communication solution. Uses standard CompactFlash connector. Just insert and fix the module, and it is immediately ready for use.
- All in one: hardware, software, connectors and stack
- Simply slide-in the module with the desired protocol
- Available for more than 20 protocols
- Open-frame if exchangeability is not necessary
- Also available with M12 connectors for up to IP67 protection
- Handy as aftersales option: Design-in the connector and place the module when needed
Anybus CompactCom B40
Ready-to-use slave communication solution for PCB assembly. Technically 100% comparable to the M40 but in a different form factor.
- Hard-, software and stack in a compact form
- PCB assembly via header connectors
- Complete freedom to choose network connectors according to your wishes
- Alternatively, ready-to-use connector boards are available
- Select the desired protocol per device
- All Ethernet variants can use the same hardware
- Very simple transfer to M40 (or vice versa)
Ixxat INpact
Ready-to-use slave communication solution for the PC. Anybus CompactCom technology in the form of a PC plug-in card as an all-in-one solution.
- Available in the form factors PCIe, Low profile PCIe, PCIe Mini and M.2
- The desired Ethernet protocol can be chosen by software during startup
- Simple programming, exactly the same interfacing as M40 and B40
- Also available for PROFIBUS
- Drivers available for Windows, Linux, QNX and INtime
IoT and Industry 4.0
Anybus Embedded is ready for the future and all Ethernet variants support (industrial) IoT and Industry 4.0.
- IoT support through OPC UA and MQTT protocols
- Transparent Ethernet functionality for application of proprietary communication and IoT services
- IT functionality with TCP/IP sockets, e-mail client and FTP server
- Built-in Web Server with JSON and Server Side Include (SSI)
- Firmware updates secured by digital signatures
- Built-in encryption to prevent illegal data read/write actions
Ixxat Safe T100
Additional module for Anybus CompactCom that allows the application of safety protocols.
- Available for PROFIsafe, Failsafe over EtherCAT and CIP Safety
- Communicates via so-called black channel
- Has independent safety inputs and outputs
- Supports safety levels up to SIL-3 / PLe
- TÜV Rheinland pre-certified for rapid implementation
Start up with CompactCom
CompactCom comes as a complete solution, including all the necessary documentation, design-in information, software and tools for a quick implementation.
- Starter Kit available for M40/B40 for evaluation with a PC
- Support PCBs for direct connection with a target microcontroller or with an evaluation kit
- Completely documented driver in C
- Support tools to configure Ethernet
- Tools and examples for Electronic Design Sheets for the PLC or Master Controller
