The embedded network specialist
+31-40-2301.922
Ixxat and Anybus SIMATIC® Gateways - Connect CAN or CANopen to Siemens networks

Ixxat and Anybus SIMATIC® Gateways

Connect CAN or CANopen to Siemens networks

Ixxat and Anybus SIMATIC® Gateways - Connect CAN or CANopen to Siemens networks

SIMATIC® CAN & CANopen Gateways by Anybus and IXXAT

Our gateways allow easy integration of CAN/CANopen fieldbus devices with Siemens equipment.

  • Use CAN and CANopen devices in Siemens systems
  • Two-way data exchange between Siemens and CAN/CANopen devices
  • Simple configuration with supplied software
Gateways between Siemens SIMATIC and CAN/CANopen
IXXAT CM CANopen for SIMATIC S7-1200

CM CANopen - SIMATIC S7-1200

Plug-in CANopen Master/Slave module for SIMATIC S7-1200.

  • Direct access to CANopen from S7-1200
  • Part of the Siemens catalog and TIA Portal
  • Also supports standard CAN (2.0A)

IXXAT CME/PN

Gateways between PROFINET and CANopen to apply CANopen devices in a Siemens network.

  • 2-port PROFINET connector for easy connection
  • Contains the most powerful and advanced PROFINET / CANopen Master on the market
  • Comes with extensive configuration software
IXXAT CME/PN
Anybus Communicator CAN for PROFIBUS or PROFINET

Anybus X-gateway CANopen

Converts CAN to PROFIBUS or PROFINET and vice versa. Uses a unique mapping to convert CAN bytes to easily processed I/O data.

  • Connect any (raw) CAN device with Siemens equipment
  • Compatible with any Siemens PLC/Controller
  • Supports CAN2.0 A/B (Standard and Extended)

Anybus X-gateway CANopen

Connects CANopen with PROFIBUS or PROFINET.

  • Seamless coupling with PROFINET IO, IRT or PROFIBUS
  • Operates as CANopen Master/Manager or as Slave
  • Easy in use
Anybus X-gateway CANopen for PROFIBUS or PROFINET
Anybus X-gateway J1939 for PROFIBUS

Anybus X-gateway J1939

Connects J1939 with PROFIBUS.

  • Seamless link between PROFIBUS and J1939
  • Supports all basic J1939 features
  • Suitable for J1939 bus speeds 250 and 500 kb/sec