USB to CAN V2 Plugin PC interface
Active CAN PC interface for embedded applications via USB
Thus, this family addresses a wide range of applications, both in industrial and automotive sectors.
By using powerful hardware and connecting over USB 2.0 Hi-Speed (480 MBit/sec), these interfaces achieve very high data throughput with minimum latency and low power consumption. This allows them to provide the reliable, loss-free transmission and receipt of messages in CAN networks at high transmission rates and bus load.
Due to the very attractive price and the compact design the USB to CAN V2 Plugin interface is ideally suited for use in series production.
Features and benefits
- Cost-effective and extremely versatile
- Compact dimensions
- Common driver interface for easy exchange of the PC interface type
- For industrial and automotive applications
- Galvanic isolation optional
Variants
The Ixxat USB to CAN V2 plugin is based on the latest USB to CAN V2 family. The interface has the same characteristics as the other USB to CAN V2 variants and is fully supported by the Ixxat driver packages for Windows (VCI) and Linux (ECI).
With up to two CAN high speed channels, one CAN low speed channel and one LIN channel – which can be configured via software to operate as master or slave – a large range of applications can be covered, both in the industrial and automotive area.
| Technical Data | |
| PC bus interface | USB 2.0 (Hi speed 480 MBit/sec) |
| Microcontroller | 32 bit |
| CAN | |
| CAN controller | CAN 2.0A/B |
| CAN baudrates | 10 kBit/s ... 1 Mbit/s |
| CAN high-speed transceiver | TI SN65HVD251D |
| CAN low-speed transceiver 1 | TJA1055T |
| LIN1 | |
| LIN transceiver 1 | TJA1020 |
| LIN protocol 1 | V1.3 and V2.0 |
| LIN baudrate 1 | Max. 20 kBaud |
| Galvanic decoupling | Optional (1 kV, 1 sec.) |
| Power supply | 5 Volt, max 500 mA |
| Temperature range | -40 ºC ... +85 ºC |
| Connections | Fieldbus: single row female header; 2,54 pitch |
| CAN: single row female header; 2,54 pitch | |
| Dimensions | 67,5 x 40 x 9,2 mm |
| Certification | CE, EN 55022:2010, EN61000-6-1:2007 |
| Weight | max 15 gram |
1 CAN low-speed and LIN applicable only to USB to CAN V2 Automotive | |
| Contents of delivery |
| - USB to CAN V2 Plugin Interface |
| - Driver VCI for Windows™ 2000, XP, Vista, Win 7, Win 8 and Win 10 (all 32/64-bit) |
| - Driver ECI for Linux, VxWorks and other OS |
| - Bus-monitor "canAnalyser3 Mini" for CAN and LIN, when applicable (Windows™) |
| - User Manual |
Part number(s)
without Galvanic Isolation
with Galvanic Isolation
with Galvanic Isolation
1x CAN low-speed and 1x LIN
